Cubic heat exchanger
Cubic Block Heat Exchanger Series EB
The functional principle of cubic block heat exchangers are similar to those of cylindrical equipment, but their structural design is different. In securing the graphite block column, the forces exerted by bracing the top against the bottom pressure plate are transmitted not via the steel shell but via tie rods extending over the entire length of the heat exchanger.
On the service side, the graphite blocks are interconnected by U-pipes, which are braced against the blocks via steel pressure plates. Separate gaskets are used to seal the product and service sides against leakage into atmosphere.
This gasket system prevents product and service media from mixing if the gaskets are damaged.
*The area of absorber is 0.5㎡~65㎡
*Maximum pressure of product side:0.5MpaG
*Maximum pressure of service side:0.7MpaG
*Maximum service temperature,depending on
the medium, up to 200℃